Monthly Archives: April 2023

Working pressure range (0~100)bar; (0~200)bar Components 1. Connection port 1: Use for connect products under test, size is M20*1.5 female,2. Connection port 2: Use for connect pressure comparator, size is M20*1.5 male.3. Handle of drain valve: Turn off the drain port clockwise, and open the drain portcounterclockwise4. Drain port: Used to drain off the remaining oil5. O rings : Seal function6. Inner core extracting rod: pick up this rod when change the O-rings inside or repair it. Operation 1. Take off the Inner core extracting road before using, to check the O-rings inside the outputs okor not.2. Connect this item on the pressure comparator ( or other pressure generator) and tighten it.3. Connect the products under test on the connection port 14. Close the drain port by rotate the handle of drain valve clockwise.5. Start the calibration job step by step. Attention 1. Open the handle of drain ports, to…

64pcs/case

Working pressure range (0~600)bar; (0~700)bar Using This products mainly used for Oxygen gauge, Acetylene Meter and other non-oil instrument, also can be used to maintenance,cleaning, isolation pollution and corrosion Protection and so on. Specification Pressure range: (0~600)barDimension: Φ88 X 189mmConnection: M20*1.5Compressed volume cavity: 137mlWorking media: Water, Transform oil , Non corrosive liquid. Structure Nut: Seal the separator when it do not work.Quick adapter: Size is N201.5Female, used to quick connect The products under test. O -ring: size is ∮ 9×2.65 Bleed Screw: Used to input water or other media into the separator Separator Cavity： Store and Isolate the medium. Stud: Size is M201.5Male, used to connect pressure comparator Operation 1. Connect the separator with pressure comparator, then input full water or other media from bleed screw into the separator by special tools ( such as syringe, rubber pipette bulb and so on).2. Tighten the bleed screw. Then take off the…

10pcs/case

18pcs/case

◆ Generated pressure:(0-60)kPa/(0-450mmHg)◆ Control pressure stability:0.05%F.S◆ Pressure measuring:(0-60)kPa/(0-450)mmHg◆ Accuracy:±0.1%F.S◆ Resolution:0.01kPa(0.1mmHg) Product Description ME02 Non-invasive Sphygomanometer Calibrator is used for simulating human body blood pressure with output signal stability and good repeatability. It provides static pressure output& measuring, automatic leaking testing,dynamic blood pressure simulating function .that is used for calibrating sphygomanometer in metrology body, hospital , the University lab, sphygomanometer manufacturers and so on . Technical specification ◆ Generated pressure:(0-60)kPa /(0-450mmHg)◆ Control pressure stability:0.05%F.S◆ Pressure measuring:(0-60)kPa/(0-450)mmHg◆ Accuracy:±0.1%F.S◆ Resolution:0.01kPa(0.1mmHg)◆ Adults simulating range:    Systolic pressure (50-255)mmHg/(6.7-34)kPa    Diastolic pressure (30-195)mmHg/(4.0-26)kPa    Newborn simulating range:    Systolic pressure (30-120)mmHg/(4.0-16)kPa    Diastolic pressure (10-100)mmHg/(1.3-13.3)kPa◆ Blood pressure value repeatability: less than(2mmHg)◆ Heart rate range:(30-250) times/mins◆ Heart rate accuracy:±1%R.D◆ Pulse value:(0.1-2.4)m Features ◆ Portable,easy to use in fild◆ With rechargeable battery◆ Automatically pressurized and depressurized◆ 7 inch touch-screen, external wireless mouse◆ Adopt import pressure transducer and pressure components◆ Remindering when the pressure value approaching◆ Stability time set 0-60s selectable◆ Voice is less…

◆ Generated pressure range:(0~40)kPa/(0-300mmHg)◆ Accuracy:0.05%F.S◆ Working media:Air Product Description ME01 Sphygmomanometer Calibrator integrates pressure generating and measuring into one.  Microprocessor in ME01 will be able to make automatic adjustment and compensation of non-linear and zero drift. the built in high-stability pressure-transducer and 24-bit A/D converter will insure the precision and the stability of the unit. .that is used for calibrating sphygomanometer in metrology body, hospital ,the University lab, sphygomanometer manufacturers and so on . Technical specification ◆ Generated pressure range: (0~40)kPa / (0-300mmHg)◆ Accuracy:0.05%F.S◆ Working media:Air◆ Double lines large LCD◆ Pressure unit kPa and mmHg display simultaneously◆ Build in pressure transducers ,manual calibrate without the hardware adjustment◆ Power adaptor 9Vdc ,build in rechargeable lithium battery◆ Dimensions:145L×160W×130H (mm)◆ Weight:2.2kg Features ◆ Built in pressure source, easy to pressurization◆ With F-adjust function get the exact pressure value◆ The pressure value could be regulated randomly◆ Pressure unit kPa & mmHg display simultaneously◆ Calibrating (0-40)kPa pressure gauge◆ Large…

◆ Accuracy: 0.05%F.S◆ Weight : 0.35kg◆ Dimensions: 185mm×93mm×47mm Products Description HS219 Temperature Calibrator integrates measurement and source of voltage, mV, resistance, simulate thermocouple and simulate RTD into one. It feature in high precision, high resolution and reliable. With big LED display, it is easy to operation, with firm structure, small and convenient. Features ◆ Measure the output temperature of thermal resistance and thermocouple ◆ Simulate thermal resistance and thermocouple ◆ Thermocouple measurement and output all supply auto and manual temperature compensation. ◆ Automaitc identification of three-wire or four-wire connection mode ◆ Perfect performance on waterproof protection: IP67 grade ◆ In case of connecting 220V with automatic over voltage protection function ◆ With manual stepping, automatic stepping and 0 ~ 100% output of phase step and ramp function ◆ LED with white backlight

◆ Accuracy: 0.05%F.S◆ Weight : 0.35kg◆ Dimensions: 185mm×93mm×47mm Products Description HS218 RTD Calibrator is a kind of calibrating RTD temperature transmitter instrument, it can use on site. It can measure and simulate various type RTD. It can also simulate and test resistance Features ◆ Measure output temperature of thermal resistance ◆ May simulate output of thermal resistance ◆ Automatic identification of three-wire or four-wire connection mode ◆ Perfect performance on waterproof protection: IP67 grade ◆ In case of connecting 220V with automatic over voltage protection function. ◆ With manual stepping, automatic stepping and 0 ~ 100% output of phase step and ramp function ◆ LED with white backlight

◆ Accuracy: 0.05%F.S◆ Weight : 0.35kg◆ Dimensions: 185mm×93mm×47mm Products Description HS217 Hand-held Thermocouple Calibrator integrates measurement and output of voltage, mV signal, thermocouple into one. With LED, the data could be showed more clearly. Features ◆ Simulate thermocouple in the form of temperature ◆ Measurement and output of thermocouple all supply auto and manual temperature compensation ◆ Perfect performance on waterproof protection: IP67 grade ◆ In case of connecting 220V with automatic over voltage protection function ◆ With manual stepping, automatic stepping and 0 ~ 100% output of phase step and ramp function. ◆ LED with white backlight